Photos left out or not connected
Pano Plan works out where each photo was taken from what it shares with the photos around it. When some photos don’t fit, it says what happened and how to go on.
Some photos are left out
The floor plan is drawn without them, and Not on the plan yet lists them: they couldn’t be matched with the photos around them. For each one:
- Place it: click or tap the plan where the photo was taken, drag the pin (or use the arrow keys) until it stands there, then press Put it here. The photo then has its place in the tour.
- Leave out: the plan stays as it is.
Both are free. A photo’s 1 AI edit for placing is used whether or not it connects.
The photos make two parts
Your photos make 2 parts means Pano Plan drew each part but couldn’t see how they join. That happens when no photo was taken where they meet, such as an open doorway, or when one part is outdoors. Choose how to go on:
- Show where they meet (the easiest, about 2 AI edits): pick one photo from each part taken close to each other, with nothing in between, like both sides of an open door. Pano Plan joins the parts there. If they don’t line up, pick another pair or place the part yourself.
- Place it myself (free): drag and turn the part next to the rest, then press Done to join them into one floor plan.
- Keep separate plans (free): each part gets its own plan, like Inside and Outside, and its own style.
- Add photos where they meet (about 2 AI edits a photo): take a photo in the open doorway between the parts, add it, and Pano Plan tries again.
A home in more than two parts goes through this one part at a time.
No photos connect
We couldn’t connect these photos means no two photos show enough of the same space to tell where they were taken, so no floor plan is drawn. Only placing the photos is charged. The usual causes:
- Taken far apart: take a photo every 3 to 5 steps, never more than 10 metres from the last one.
- Doors closed between rooms: open them, and take a photo in each doorway.
- Photos of different places: add the photos of one home.
- Not straight from a 360° camera: use the camera’s own 360° photo, not a phone panorama or a drone photo.
Then click Add more photos, Start over with other photos, or See how to take photos.